HDPE Butt Fusion 90 Degree Elbow

HDPE Butt Fusion 90 Degree Elbow

Injection moulded HDPE Butt Fusion 90 Degree Elbow for HDPE pipes, available 63-800mm in SDR11 & SDR17, high quality warranted with 15 years, competitive wholesale prices, STOCK AVAILBLE for regular sizes, prompt delivery available. Contact us for more details of HDPE Butt Fusion 90 Degree Elbow!!!
  • Product Details:
    The butt fusion method of joining is by far the most common method of connecting polyethylene pipe in all diameters. The ends of polyethylene pipe when heated and brought together under pressure with specialized equipment form one continuous "leak proof" pipeline. Properly made, a pipe fusion is as strong as the pipe itself and has the same life expectancy.

    SUNPLAST HDPE butt fusion fittings are made by imported PE80 or PE100 raw material from famous suppliers that has high resistance, they are mainly used in SUNPLAST HDPE pipe system for water & gas. The HDPE butt fusion fittings can fully comply with EN12201-3, EN1555 & EN ISO 15494 standard.

    SUNPLAST has the ability to provide HDPE butt fusion fittings in a wide variety of sizes from DN63mm to DN800mm in SDR11 & SDR17, including: end cap, stub flange, steel backing rings, equal tee, reducing tee, reducer, elbow 45deg, elbow 90deg.,etc.

    SUNPLAST has a lot of stock for normal sizes, can be delivered in a short time!!

    Product name

    HDPE Butt Fusion 90 Degree Elbow

    Sizes available


    SDR ratings

    SDR11 & SDR17

    Material used

    virgin PE80 or PE100 raw material

    Colors available

    Normal in black, or as per request

    Standards follow to

    EN12201-3, EN1555, EN ISO 15494


    Customer's logo can be stamped

    Samples available

    Yes, sample available for small quantity

    Packing method

    PP bags or cartons



    Production lead time

    Depending on the order quantity.
         About bout 7-10 days for a 40hc container.

    Warranty time

    15 years for normal using

    Payment term

    T/T or LC at sight

    FOB loading port

    Ningbo or Shanghai China

    Place of origin

    Zhejiang, China


    Product Specifications:
    The HDPE Butt Fusion 90 Degree Elbow can be provided from DN63mm to DN800mm. The specific specifications as follows:

































    Remark: "√" means available, "-" means unavailable

    Workshop & manufacturing Facility
    SUNPLAST company has two manufacturing workshop located in Zhejiang province China, and the total area covers more than 10000㎡. The workshop is equipped with advanced production lines for HDPE pipes & injection machines for HDPE pipe fittings, such as Barton Heidfeld and Krauss-Maffei extruders, Haitian etc, which feature high production efficiency and great stability. With memory function & high automatic, they ensure the stable quality of pipes & fittings.




    Testing Equipment     
    For all SUNPLAST HDPE pipes & HDPE pipe fittings, before shipment, they must pass very strict quality inspection & test, which is throughout the whole production process, from incoming material to finished goods packing. This ensure the pipes & fittings we provide to our customers are 100% qualified. 

    All of HDPE pipe & HDPE pipe fittings are made by superior quality PE80 or PE100 raw material from famous suppliers in worldwide, such as Borealis, Sabic, Sinopec.etc.



    Loading & Shipment
    SUNPLAST HDPE pipe & fittings has been exporting to more than 30 countries & areas. Due to superior quality & the best service, we have built long & good business relationship with our customers, and they all satisfy about us all the time, some of our customers even have been working with us for more than 10 years.



    ※ What are HDPE elbow 90°?
    A: HDPE elbow 90°/HDPE bend 90°are mainly used for HDPE pipeline which need to bend at 90°. 

    ※ What does "butt fusion" mean? 
    A: Butt fusion is a thermofusion process which involves the simultaneous heating of the ends of two pipe/fitting components which are to be joined, until a molten state is attained on each contact surface. The two surfaces are then brought together under controlled pressure for a specific cooling time and a homogeneous fusion joint is formed. The resultant joint is fully resistant to end loads and has comparable performance under pressure to the pipe itself. 

    ※ What pressure rating can SUNPLAST provide for HDPE butt fusion fittings? 
    A: SUNPLAST HDPE butt fusion fittings can be provided in SDR11 & SDR17, with pressure rating of PN12.5bars & PN8 bars for PE80 fittings, PE16bars & PN10bars for PE100 fittings. 

    ※ How can HDPE pipe & HDPE butt fusion fittings be connected? 
    A: The HDPE pipes & HDPE butt fusion fittings are connected by butt fusion welding machine. SUNPLAST is able to provide complete butt fusion welding machine.

    Why choose us?
    ※ More than 15 years'rich experience in manufacturing, we are an expert in this industry.
    ※ Complete fittings & welding machines to support the connection of pipes
    ※ Strong after-sale term supports to provide professional guide for installation
    ※ By using top quality raw material, with long warranty time on quality.
    ※ Short lead time to satisfy your urgent need request.
    ※ Quick reply for your enquiries within 12 hours.
    ※ OEM service available to support a good sale in customers’market.

    Contact us
    Contact us freely for any inquiries on our products by following:

    Telephone: 0086-574-87226883
    Fax: 0086-574-87467583
    Mob: 0086-15968493053

    24 hours on line contact:
    whatsApp: 0086-15968493053
    Skype: polypipe-manufacturer

    Sunplast, through over 15 years' development, is now known as one of the leading manufacturers and suppliers of hdpe butt fusion 90 degree elbow in China. Our factory has introduced many advanced technologies and equipments into it. Please be free to buy the quality and low price products made in China from us.