PE-Al-PE Pipe for Cold Water (Overlapped Welding) Multilayer Pipe


Product Detail

Basic Info

  • Compound Material:Aluminium Plastic Compound Pipe

  • Material:PE-Al-PE

  • Installation and Connection:Clamping Type Installation

  • Technology of Plastic Composite Pipe:Internal and External Coating

  • Base Pipe of Plastic Composite Pipe:Welded Steel Pipe

  • Internal Coating Materials of Plastic Composite Pipe:Epoxy Resin Coating Steel Pipe

  • Plastic Composite Pipe Coating Form:Inner and Outside Coating

  • Plastic Composite Pipe Model:GS-—X-SP-T-EP

  • Steel Skeleton PE Pipe Use:Municipal

  • Aluminium Plastic Compound Pipe Use:Water Distribution Pipe in Building

  • Steel Plastic Composite Pipe Model:GS-—X-SP-T-EP

  • Aluminium Plastic Compound Pipe Material:Crosslinked Polyethylene Aluminum Composite Pipe

  • Trademark:SUNPLAST or OEM

  • Transport Package:200m/Coil, 100m/Coil, 50m/Coil

  • Specification:1216mm-2632mm

  • Origin:China

  • HS Code:391739

Product Description

PE-AL-PE pipe is a PE pipe with an aluminum layer sandwiched between an inner and outer layer of PE,We can produce both overlap-welded and butt-wedled pe-al-pe pipe,products confirms to DIN EN ISO 21003-2 Certified Max working temperature up to 65oC,working pressure 10bars.

1) Specification: Φ 16 - 32
2) Non-toxic, anti-corrosive
3) Light weight, strong mechanical properties and thermal-resistant ability
4) Low fragile humidity and long using life
5) Low flowing resistance inside the pipe, scaling can rarely happen
6) The fluids cannot be contaminated. Effective diameters are big
7) Oxygen is 100% isolated and infiltration is thoroughly prevented. In case they are used as shielding materials for telecommunication circuit, magnetic interference can be prevented
8) Anti-static, and suitable for gas and fuel transportation
9) Can be bended or straightened without restriction


Thermal conductivity: 0.45W/m. K
Thermal Expansivity : 2.5 X 10-5 m/m. K
Bend Radius:  ≥ 5D (D: Tube Diameter)
Operating Temp Range : -40 - +95° C
Working Pressure:  ≤ 1.25Mpa
Radial Force Penstock : 2400 - 3320N
Bursting Strength:  5.5 - 8Mpa